Nokia 9356900 issue 1 Telephone User Manual


 
90
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
14.4.4 +CDSI New SMS-STATUS-REPORT indication
Format Description
+CDSI: <mem>,<index> when +CNMI=0: indications are buffered into the Nokia 22
when +CNMI=1: in the on-line data state, indications are discarded; in command
mode they are forwarded directly to the TE
when +CNMI=2: in the on-line data state, indications are buffered into the Nokia
22; in the command mode forwarded directly to the TE
Defined values
<mem> memory to which the received SMs are preferred to be stored:
"SM" SIM message storage
<index> integer type, the location of the message in the defined memory
14.4.5 +CDS New SMS-STATUS-REPORT
Format Description
text mode:
+CDS: <fo>,<mr>,[<ra>],[<tora>],
<scts>,<dt>,<st>
PDU mode:
+CDS: <length><CR><LF><pdu>
when +CNMI=0: routed messages are buffered into the Nokia 22 (if
buffer is full, ‘memory capacity exceeded’ is sent to the network)
when +CNMI=1: in the on-line data state, the routed messages are
rejected (e.g. ‘memory capacity exceeded’ is sent to the network and
when the command mode is entered, ‘memory available’ is sent to
network); in the command mode they are forwarded directly to the TE
when +CNMI=2: in the on-line data state routed, messages are buffered
into the Nokia 22 (if the buffer is full, ‘memory capacity exceeded’ is sent
to the network and when the command mode is entered, ‘memory
available’ is sent to network); in the command mode, they are forwarded
directly to the TE
See also the +CNMA command.
Defined values
<fo> first octet of GSM 03.40 SMS-STATUS-REPORT in integer format
<mr> GSM 03.40 TP-Message-Reference in integer format
<ra> GSM 03.40 TP-Recipient-Address Address-Value field in string format;
type of address given by <tora>
<tora> GSM 04.11 TP- Recipient -Address Type-of-Address octet in integer
format:
129 unknown/telephony
145 internal/telephony
<scts> GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format
<dt> GSM 03.40 TP-Discharge-Time in time-string format:
“yy/MM/dd,hh:mm:ss±zz”