Filter
Top Products
50
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
also all other values below 128 are reserved
<time>: 1...30 when "no reply" is enabled or queried, gives the time in seconds to wait before
a call is forwarded. The default value is 20.
<status>:
0 not active
1 active
7.15 +CHLD Call related to SSs
Command response +cme error
Execute
+CHLD=<n>
x
test
+CHLD=? +CHLD: (0,1,1x,2,2x,3,4)
Optional. See ETSI GSM 07.07 /2/, section 7.12. Controls call hold, multiparty and explicit call
transfer supplementary service operations as defined in GSM 02.30, section 4.5.5.1. A short
description of <n> values: 0 = release waiting or incoming call (send ‘busy’ cause to network), or
held calls; 1 = release active calls and accept another (waiting or held) call; 1x = release active call
x; 2 = active calls on hold and accept another (waiting or held) call; 2x = active multiparty call on
hold except for call x; 3 = add a held call to a multiparty call; 4 = connect a held call to an active (or
MO alerting) call (locally both calls are disconnected).
7.16 +CAOC Advice of charge
Command response +cme error
execute
+CAOC[=<mode>] [+CAOC: <ccm>]
x
read
[+CAOC?] +CAOC: <mode>
test
+CAOC=? [+CAOC: (0-2)]
Optional. See ETSI GSM 07.07 /2/, section 7.15. Returns the current call meter value (in home
units) from the ME.