Filter
Top Products
47
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
<m>:
0 no further user action required (network initiated USSD-Notify, or no
further information needed after mobile initiated operation)
1 further user action required (network initiated USSD-Request, or further
information needed after mobile initiated operation)
7.11 +CSSN Supplementary service notifications
Command Response Default
Set
+CSSN=<n>,<m> 0,0
Read
+CSSN? +CSSN: <n>,<m>
Test
+CSSN=? +CSSN: (0,1),(0,1)
The +CSSN command controls the presentation of the +CSSI intermediate result code and the
+CSSU unsolicited result code.
The test command returns the supported values.
Defined values
<n> sets/shows the +CSSI result code presentation status:
0 disable
1 enable
<m> sets/shows the +CSSU result code presentation status:
0 disable
1 enable
7.12 +CLCC List current calls
Command Response +cme error
Execute
+CLCC [+CLCC: <id1>,<dir>,<stat>,<mode>,<mpty>
[<CR><LF>+CLCC: <id2>,<dir>,<stat>,<mode>,<mpty>
[...]]]
x
Test
+CLCC=?
The +CLCC command returns a list of current calls of the Nokia 22. If the command succeeds but
no calls are available, no information response is sent.
Defined values
<idx> integer type call identification number as described in GSM 02.30 4.5.5.1. This
number can be used in the +CHLD command operations.