Nokia 9356900 issue 1 Telephone User Manual


 
62
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
The +CSDH command controls whether detailed header information is shown in the text mode
result codes.
The test command returns the supported values as a compound value.
Defined values
<show>:
0 do not show header values defined in the commands +CSCA and
+CSMP (<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>,
<toda> or <tooa> in the +CMT, +CMGL, +CMGR result codes for SMS-
DELIVERs and SMS-SUBMITs in the text mode; for SMS-COMMANDs
in the +CMGR result code, do not show <pid>, <mn>, <da>, <toda>,
<length> or <cdata>
1 show the values in result codes
10.7 +CSCB Select cell broadcast message types
Command Response Default +cms
error
Set
+CSCB=<mode>,<mids>,<dcss> 0,"","" x
Read
+CSCB? +CSCB: <mode>,<mids>,<dccs>
Test
+CSCB=? +CSCB: (0,1)
The +CSCB command defines the types of CBMs that are to be received.
The test command returns the supported modes as a compound value.
Defined values
<mode>:
0 message types specified in <mids> and <dcss> are accepted
1 message types specified in <mids> and <dcss> are not accepted
<mids> string type, all the possible combinations of GSM 03.41 CBM message
identifiers, e.g. "0,1,5,320-478,922"
<dcss> string type, all the possible combinations of 03.38 CBM data coding
schemes, e.g. "0-3,5”
10.8 +CSAS Save settings
Command Response Default +cms
error
Execute
+CSAS=<profile> [1] x
Test
+CSAS=? +CSAS: (0,1) x