Nokia 9356900 issue 1 Telephone User Manual


 
18
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
The &K command changes the same setting as the +IFC. The use of +IFC is recommended.
5 GENERIC COMMANDS
5.1 V.25ter
5.1.1 Z Reset to default configuration
Command Description
Execute
Z[0] reset to stored profile 0
Z1 reset to stored profile 1
The settings that are not stored in a profile (refer to &W) will be reset to their factory defaults (refer
to &F). The implementation is according to GSM 07.07 section 5.7.
5.1.2 &F Set to factory-defined configuration
Command Description
Execute
&F[0] reset to factory
defaults
This command instructs the Nokia 22 to set default values to all parameters. The command
parameters that are reset to their factory defaults are: S3, S4, S5, E, Q, V, X, &C, &D, +IFC,
+ILRR, S25, &S, +CSCS, S0, S7, S8, S10, +DS, +DR, S2, S12, +CSTA, +CMOD, +CBST, +CRLP,
+CR, +CRC, +CSNS, +CREG, +COPS (only <format>), +CLIP, +CLIR, +COLP, +CCWA (only
<n>), +CUSD (only <n>), +CSSN, +CMER, +CPBS, +CMEE, +CSMS, +CPMS, +CMGF, +CSCA,
+CSMP, +CSDH, +CSCB, +CNMI.
5.1.3 I Request identification information
Command Response Description
Execute
I[0] Nokia Mobile Phones same as +GMI
I1 IMEI same as +GSN
I2 SWx.xx same as +GMR
I3 22 RPM-3 GSM900/1800 same as +GMM
I4..I13 Ignored values
5.1.4 +GMI Request TA manufacturer identification
Command Response
Execute
+GMI Nokia Mobile Phones
5.1.5 +GMM Request TA model identification
Command Response
Execute
+GMM 22 RPM-3 GSM900/1800