Nokia 9356900 issue 1 Telephone User Manual


 
42
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
7.5 +CPWD Change password
Command Response +cme
error
Execute
+CPWD=<fac>,<oldpwd>,<newpwd> x
Test
+CPWD=? +CPWD: ("PS",5),("SC",4),("AB",4),("P2",4)
The +CPWD command sets a new password for the facility lock function defined by the Facility
Lock +CLCK command. Note that the target lock has to be in <mode>=1.
The test command returns a list of pairs that present the available facilities and the maximum
length of their password.
Defined values
<fac>:
"PS" PH-SIM lock Phone to SIM card
"SC" SIM lock SIM card
"AB" All Barring services
"P2" SIM PIN2
<oldpwd>, <newpwd> string type; <oldpwd> shall be the same as the password
specified for the facility from the ME user interface or using the Change Password
+CPWD command. <newpwd> is the new password
7.6 +CLIP Calling line identification presentation
Command Response Default
Set
+CLIP=<n> 0
Read
+CLIP? +CLIP: <n>,<m>
Test
+CLIP=? +CLIP: (0,1)
The +CLIP command refers to the GSM supplementary service CLIP (Calling Line Identification
Presentation) that enables a called subscriber to get the calling line identity (CLI) of the calling
party when receiving a mobile terminated call. The +CLIP command enables or disables the
presentation of the CLI. It has no effect on the execution of the CLIP supplementary service in the
network.
When the presentation of the CLI is enabled (and the calling subscriber allows it), +CLIP: number>,
<type> response is returned after every RING (or +CRING: <type>; refer to "Cellular result codes
+CRC") result code.
The read command gives the status of <n> and triggers an interrogation of the provision status of
the CLIP service according GSM 02.81 (given in <m>).The test command returns the values
supported by the Nokia 22 as a compound value.