Filter
Top Products
34
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
6.3.11 +CHSR Current call parameters reporting
Command Response Default
Set
+CHSR=<mode>
1
Read
+CHSR? +CHSR: <mode>
Test
+CHSR=? +CHSR: (0,1)
When the CHSR=1 is set, the current HSCSD configuration is written to the terminal window every
time the HSCSD configuration has changed or a new HSCSD call has been initiated. To disable
the feature, key in at+chsr=0.
6.3.12 +CSNS Single numbering scheme
Command Response Default
Set
+CSNS=<mode> 0
Read
+CSNS? +CSNS: <mode>
Test
+CSNS=? +CSNS: (0-7)
The +CSNS command selects the bearer or teleservice to be used when a mobile terminated
single numbering scheme call is established, i.e. when a call without bearer capability element is
received.
The parameter values set with the +CBST command shall be used when <mode> equals a data
service. If the +CBST parameter is set to a value that is not applicable to single numbering calls,
the parameter shall be mapped to the closest valid value.
Defined values
<mode>:
0voice
1 alternating voice/fax, voice first (TS 61)
2 fax (TS 62)
3 alternating voice/data, voice first (BS 61)
4 data
5 alternating voice/fax, fax first (TS 61)
6 alternating voice/data, data first (BS 61)
7 voice followed by data (BS 81)