Nokia 9356900 issue 1 Telephone User Manual


 
25
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
6.1.6 O Return to online data state
Command Possible verbose
result codes (V1)
Numeri
c (V0)
Description
Execute
O CONNECT 1 Data/fax call established; rate 300 bps (or X forbids rate
display)
CONNECT 1200 5 Data / fax call established; rate 1200 bps
CONNECT 2400 10 Data / fax call established; rate 2400 bps
CONNECT 4800 11 Data / fax call established; rate 4800 bps
CONNECT 9600 12 Data / fax call established; rate 9600 bps
CONNECT 14400 17 Data call established; rate 14400 bps
CONNECT 19200 18 Data call established; rate 19200 bps
CONNECT 28800 19 Data call established; rate 28800 bps
CONNECT 38400 20 Data call established; rate 38400 bps
ERROR 4 Command cannot be actioned
CARRIER 16 Call will be established
NO CARRIER 3 Call could not be established
OK 0 Command aborted
The O command returns the Nokia 22 to the online data state from the online command mode. The
implementation is according to GSM 07.07 section 6.18.
6.1.7 S0 Automatic answer
Command Response <n> values
Set
S0=<n> 0..255 (default 0)
Read
S0? <n> 000..255
The S0 command sets the number of rings (RING or +CRING result codes) to wait before
answering automatically. 0 disables auto answering.
6.1.8 S6 Pause before blind dialling
Command Response <n> values
Set
S6=<n> 2..10
Read
S6? 002 002
The S6 command is ignored. The implementation is according to GSM 07.07 section 6.18.
6.1.9 S7 Connection completion time-out
Command Response <n> values
Set
S7=<n> 0..255 (default 60)
Read
S7? <n> 000..255
The S7 command sets the number of seconds to wait for the completion of call answering or
originating procedure before giving up and disconnecting. The implementation is according to GSM
07.07 section 6.18.