Filter
Top Products
49
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
7.14 +CCFC Call Forwarding Number and Conditions
Command Response default +cme error
Execute
+CCFC=<reason>,
<mode>,<number>
,
<type>,<class>,
<subaddr>,
<satype>,
<time>
when <mode>=2:
+CCFC: <status>,<class1>[,<number>,<type>
[,<subaddr>,<satype>[,<time>]]]
[<CR><LF>+CCFC:
<status>,<class2>[,<number>
,<type>[,<subaddr>,<satype>[,<time>]]]
[...]]
[,,,
129/145,7
,,128,20]
x
Test
+CCFC=? +CCFC: (0-5)
This command controls call forwarding supplementary services. The <reason> values 4 and 5 are
only applicable for <mode>=0. When the status request response from network indicates that the
SS is active for specific data bearer services (e.g. ‘circuit async’), the AT interface shall only
indicate ‘data’ (<class>=2) (the ‘not active’ case is displayed only when the SS is not active to any
service; i.e. +CCFC: 0,7).
Parameters:
<reason>:
0 unconditional
1 mobile busy
2 no reply
3 not reachable
4 all call forwarding (GSM 02.30)
5 all conditional call forwarding (GSM 02.30)
<mode>:
0 disable
1 enable
2 query status
3 registration
4 erasure
<number>: string type phone number of forwarding address in the format specified by <type>
<type>: type of address octet in integer format (GSM 04.08, subclause 10.5.4.7). The default
value is 145 when the dialling string includes the international access code character
"+", otherwise the default value is129
<subaddr>: string type subaddress of the format specified by <satype>
<satype>: type of subaddress octet in integer format (GSM 04.08, subclause 10.5.4.8). The
default value is 128.
<classx> a sum of integers each representing a class of information (the default value 7 equals
all classes):
1 voice
2 data
4 fax