Nokia 9356900 issue 1 Telephone User Manual


 
88
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
<index> integer type, the location of the message in the defined memory
14.4.2 +CMT New SMS-DELIVER
Format Description
text mode:
+CMT: <oa>,<scts>
[,<tooa>,<fo>,<pid>,<dcs>,<sca>,
<tosca>,<length>]<CR><LF><data>
PDU mode:
+CMT: <length>
<CR><LF><pdu>
when +CNMI=0: routed messages are buffered into the Nokia 22 (if the
buffer is full, ‘memory capacity exceeded’ is sent to the network)
when +CNMI=1: in the on-line data state, the routed messages are
rejected (e.g. ‘memory capacity exceeded’ is sent to the network and
when the command mode is entered, ‘memory available’ is sent to the
network); in the command mode they are forwarded directly to the TE
when +CNMI=2: in the on-line data state, routed messages are buffered
into the Nokia 22 (if the buffer is full, ‘memory capacity exceeded’ is
sent to the network and, when the command mode is entered, ‘memory
available’ is be sent to the network); in the command mode they are
forwarded directly to the TE
See also +CNMA command.
Defined values
<oa> GSM 03.40 TP-Originating -Address Address-Value field in string
format; the type of address is given by <tooa>
<scts> GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format
<tooa> GSM 04.11 TP-Originating -Address Type-of-Address octet in integer
format
129 unknown/telephony
145 internal/telephony
<fo> first octet of GSM 03.40 SMS-DELIVER, SMS-SUBMIT, SMS-STATUS-
REPORT, or SMS-COMMAND in integer format
<pid> GSM 03.40 TP-Protocol-Identifier in integer format
<dcs> GSM 03.38 SMS Data Coding Scheme in integer format
<sca> GSM 04.11 RP SC address Address-Value field in string format, type of
address given by <tosca>
<tosca> GSM 04.11 RP SC address Type-of-Address octet in integer format
129 unknown/telephony
145 internal/telephony
<length> integer type value that indicates the length of the message body <data>
in characters in the text mode (+CMGF=1); or that indicates the length
of the actual TP data unit in octets (i.e. the RP layer SMSC address
octets are not counted in the length) in the PDU mode (+CMGF=0).