Filter
Top Products
78
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
13 FAX COMMANDS
The following standard facsimile (+F) command sets are supported by Nokia 22 according to GSM
03.45 facsimile group 3 transparent. The specification of these commands is out of the scope of
this document. The command structures can be found in the referred standards:
- Class 1, TIA-578-A /4/
- Class 2, TIA SP-2388 /6/
- Class 2.0, TIA-592 and ITU-T T.32 /7/
In the classes 2 and 2.0, the Nokia 22 Error supports the correction mode (ECM) with 16k send
and receive buffers. The facsimile commands supported by the Nokia 22 are listed below.
13.1 TIA-578-A
+FCLASS Select, read or test Service Class
+FMI Report manufacturer identification
+FMM Request model identification
+FMR Request revision identification
+FTS Transmit silence
+FRS Receive silence
+FTM Facsimile transmit
+FRM Facsimile receive
+FTH HDLC transmit
+FRH HDLC receive
+FLO Flow control select
+FPR Serial port rate control
+FDD Double Escape Character Replacement
13.2 TIA-592
+FCLASS Select, read or test Service Class
+FMI Report manufacturer identification
+FMM Request model identification
+FMR Request revision identification
D Originate command
A Answer command
+FDT Data transmission
+FDR Data reception
+FKS Session termination
+FIP Initialise facsimile parameters
+FCC DCE capabilities parameters
+FIS Current session parameters
+FCS Current session results
+FLI Local ID strings
+FPI Local polling ID strings
+FNS Non-standard frame FIF octet string
+FLP Indicate document to poll
+FSP Request to poll