Filter
Top Products
57
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
8.9 +CIND Indicator control
Command Response +cme error
set
+CIND=
X
read
+CIND? +CIND: <ind>[,<ind>[,...]]
X
test
+CIND=?
Dtp2v3, CDS1.2: +CIND: ("message",(0,1)),("call",(0,1)),
("roam",(0,1)),("smsfull",(0,1))
Nokia 22: +CIND:
("message",(0,1)),("call",(0,1)),("roam",(0,1)),
("smsfull",(0,1)),("signal",(0-5))
X
Optional. See ETSI GSM 07.07 /2/, section 8.9. Queries the current status of the ME physical
indicators.
8.10 +CMER ME event reporting
Command Response Default +cme error
set
+CMER=<mode>,<keyp>,
<disp>,<ind>[,0]
2,0,0
,0[,0]
x
read
+CMER? +CMER: <mode>,<keyp>,<disp>,<ind>,0
Test
+CMER=?
Dtp2v3, CDS1.2: +CMER:
(2),(0,2),(0),(0,1),(0)
Nokia 22 1.0: +CMER: (2,3),(0),(0),(0,1),(0)
Nokia 22: +CMER: (2,3),(0),(0),(0,1),(0)
Mandatory when any of the +CKEV, +CDEV, or +CIEV result codes are implemented. See ETSI
GSM 07.07 /2/, section 8.10. Enables/disables the presentation of the keypad, display and
indicator unsolicited result codes.