Filter
Top Products
30
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
6.3.4 Mute control +CMUT
Command Response
Set
+CMUT=<n> +CME ERROR: <err>
Read
+CMUT? +CMUT: <n>
+CME ERROR: <err>
Test
+CMUT=? +CMUT: (list of supported <n>s)
Description
This command is used to enable and disable the uplink voice muting during a voice call. The test
command returns the supported values as a compound value.
Defined values
0 mute off
1 mute on
6.3.5 Loudspeaker volume level +CLVL
Command Response Default
Set
+CLVL=<level>
0,0,1
Read
+CLVL?
+CLVL: <level>
Test
+CLVL=?
+CLVL: (list of supported <level>s)
Description
This command is used to select the volume of the internal loudspeaker of the ME. The test
command returns the supported values as a compound value.
Defined values
<level>: integer type value with manufacturer specific range (smallest value
represents the lowest sound level)
6.3.6 +CBST Select bearer service type
Command Response Default
Set
+CBST=<speed>,
<name>,<ce>
0,0,1
Read
+CBST? +CBST: <speed>,<name>,<ce>
Test
+CBST=?
+CBST: (0-7,12,14-16,34,36,38,39,43,47-51,65,66,68,70,71,75
,79-81), (0,2),(0-3)
The +CBST command selects the bearer service with a data rate and the connection element to be
used when data calls are originated. The values may also be used during a mobile terminated data
call setup, especially in the case of single numbering scheme calls (refer +CSNS).
Defined values