Filter
Top Products
52
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
8.2 +CPAS Phone activity status
Command Response
Execute
+CPAS +CPAS: <pas>
Test
+CPAS=? +CPAS: (0,1,3,4)
The +CPAS command returns the activity status <pas> of the ME. It can be used to interrogate the
ME before requesting action from the phone.
The test command returns the supported values.
Defined values
<pas>:
0 ready
1 unavailable (This value is never reported.)
3ringing
4 call in progress
8.3 +CFUN Set phone functionality
Command Response Default +cme
error
Set
+CFUN=<fun>[,0] [0,0] x
Read
+CFUN? +CFUN: <fun> x
Test
+CFUN=? +CFUN: (0,1),(0)
The +CFUN command selects the level of functionality <fun> of the Nokia 22. It can be used to
stop the use of the Nokia 22 in a controlled manner. After <fun>=0, it is not possible to
communicate with the Nokia 22, but the device has to be hardware reset to establish
communication.
The test command returns supported values.
Defined values
<fun>:
0 minimum functionality
1 full functionality, this setting is ignored
8.4 +CPIN Enter PIN
Command Response +cme
error
Set
+CPIN=<pin>,<newpin> x
Read
+CPIN? +CPIN: <code> x
Test
+CPIN=?