Filter
Top Products
89
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
<data> SMS: GSM 03.40 TP-User-Data in the text mode responses
<pdu> GSM 04.11 SC address followed by GSM 03.40 TPDU in the
hexadecimal format
14.4.3 +CBM New CBM
Format Description
text mode:
+CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
PDU mode:
+CBM: <length><CR><LF><pdu>
when +CNMI=0: messages are discarded
when +CNMI=1-2: messages are
forwarded directly to the TE (CBMs
cannot be received during a call)
Defined values
<sn> GSM 03.41 CBM Serial Number in integer format
<mid> GSM 03.41 CBM Message Identifier in integer format
<dcs> GSM 03.38 Cell Broadcast Data Coding Scheme in integer format
<page> GSM 03.41 CBM Page Parameter bits 4-7 in integer format
<pages> GSM 03.41 CBM Page Parameter bits 0-3 in integer format
<data> GSM 03.41 CBM Content of Message in text mode responses; format:
- if <dcs> indicates that GSM 03.38 default alphabet is used:
- if the TE character set is other than "HEX" (refer command +CSCS in GSM 07.07):
the Nokia 22 converts the GSM alphabet into the current TE character set according
to the rules of Annex A
- if the TE character set is "HEX": the Nokia 22 converts each 7-bit character of the
GSM alphabet into two IRA character long hexadecimal numbers
- if <dcs> indicates that an 8-bit or a UCS2 data coding scheme is used: the Nokia 22
converts each 8-bit octet into two IRA character long hexadecimal numbers
<length> the length of the actual TP data unit in octets (i.e. the RP layer SMSC
address octets are not counted in the length)
<pdu> GSM 03.41 TPDU in hexadecimal format