Multi-Tech Systems MVP-2400 IP Phone User Manual


 
Quick Start Instructions MultiVOIP User Guide
70
phonebook entries at remote voips, one to account for situations where “8” is used as
the PBX access digit, and another for when “9” is used.
8. Select the voip protocol that you will use (H.323 or SIP).
9. Click OK to exit from the Add/Edit Outbound Phonebook screen.
Inbound Phonebook
1. Open the MultiVOIP program.
(Start | MultiVOIP xxx | Configuration
2. Go to Phone Book | PhoneBook Modify | Inbound Phonebook
| Add Entry.
3. In the “Remove Prefix” field, enter your local calling code (area code,
country code, city code, etc.) preceded by any other “access digits” that are
required to reach your local site from the remote voip location (think of it as
though the call were being made through the PSTN – even though it will not
be).
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
Seattle is area 206. Chicago
employees must dial 81 before
dialing any Seattle number on
the voip system.
Answer: 1206 is prefix to be
removed by local
(Seattle) voip.
London/Birming. system.
Inner London is 0207 area.
Birmingham employees must
dial 9 before dialing any London
number on the voip system.
Answer: 0207 is prefix to be
removed by local
(London) voip.
Euro, International Call Example
Rotterdam/Bordeaux system.
Rotterdam is country code 31, city code 010. Bordeaux
employees must dial 903110 before dialing any Rotterdam
number on the voip system.
Answer: 03110 is prefix to be removed by local (Rotterdam)
voip.