Filter
Top Products
Technical Configuration (Digital Voips) MultiVOIP User Guide
124
E1 Telephony Parameters (for MVP3010)
The following parameters must be known about the PBX or telco central office
equipment to which the E1 MultiVOIP will connect:
➼
E1 Phone Parameters
Ask phone company or
PBX maintainer.
Info needed to operate:
MVP3010
E1 Telephony Parameters:
Record for this VOIP Site
#
• Which frame format is used? Double Frame_____
MultiFrame w/ CRC4_____
MultiFrame w/ CRC4 modified_____
• Which CAS or PRI protocol is used? ______________
• Clocking: Does the PBX or telco switch use
internal or external clocking? _________________
Note that the setting used in the voip unit will be the
opposite of the setting used by the telco/PBX.
• Which line coding is used? AMI___ or HDB3___
• Pulse shape level?: (most commonly 0 to 40 meters)
Write down the values for these E1 parameters. You will need to enter these
values in the “T1/E1 Parameters” screen in the Configuration section of the
MultiVOIP software.