Filter
Top Products
Technical Configuration (Analog/BRI) MultiVOIP User Guide
208
4B. Fixing a Cabling Problem. If the MultiVOIP cannot be located by the
computer, two error messages will appear (saying “Multi-VOIP Not Found”
and “Phone Database Not Read”).
In this case, the MultiVOIP is simply disconnected from the network. For
instructions on MultiVOIP cable connections, see the Cabling section of
Chapter 3.
5. Configuration Parameter Groups: Getting Familiar, Learning About
Access. The first part of configuration concerns IP parameters, Voice/FAX
parameters, Telephony Interface parameters, SNMP parameters, Regional
parameters, SMTP parameters, Supplementary Services parameters, Logs, and
System Information. In the MultiVOIP software, these seven types of
parameters are grouped together under “Configuration” and each has its own
dialog box for entering values.
Generally, you can reach the dialog box for these parameter groups in one of
four ways: pulldown menu, toolbar icon, keyboard shortcut, or sidebar. ..