Multi-Tech Systems MVP-2400 IP Phone User Manual


 
Technical Configuration (Digital Voips) MultiVOIP User Guide
182
The Supplementary Services fields are described in the tables below.
Supplementary Services Parameter Definitions
Field Name Values Description
Select
Channel
1-2 (210);
1-4 (410);
1-8 (810)
The channel to be configured is selected
here.
Call Transfer
Enable
Y/N Select to enable the Call Transfer function
in the voip unit.
This is a “blind” transfer and the sequence
of events is as follows:
Callers A and B are having a
conversation.
Caller A wants to put B into contact with
C.
Caller A dials call transfer sequence.
Caller A hears dial tone and dials number
for caller C.
Caller A gets disconnected while Caller B
gets connected to caller C.
Transfer
Sequence
any phone
keypad
character
The numbers and/or symbols that the
caller must press on the phone keypad to
initiate a call transfer.
The call-transfer sequence can be 1 to 4
characters in length using any
combination of digits or characters
(* or #).
The sequences for call transfer, call hold,
and call waiting can be from 1 to 4 digits
in length consisting of any combination
of digits 1234567890*#.