Filter
Top Products
MultiVOIP User Guide Operation & Maintenance
423
5. When the file transfer process is complete, the Dialog-- IP Parameters
screen will appear.
6. Set the IP values per your particular VOIP system. Click OK. Progress bars
will appear as the MultiVOIP reboots itself.
Downloading IFM
Firmware
The Download IFM Firmware command applies only to the MVP210/410/810
and MVP210G/410G/810G models. This command transfers firmware to the
telephony interface modules of each voice channel. These firmware modules
handle the physical interface (FXS, FXO and E&M) to the attached analog
telephony equipment.