Filter
Top Products
Technical Configuration (Analog/BRI) MultiVOIP User Guide
230
FXO Interface: Parameter Definitions
Field Name Values Description
Interface, FXO Y/N Enables FXO functionality
Dialing Options
Regeneration Pulse, DTMF Determines whether digits
generated and sent out will be
pulse tones or DTMF.
Inter Digit
Timer
integer values,
in seconds
This is the length of time that the
MultiVOIP will wait between
digits. When the time expires, the
MultiVOIP will look in the
phonebook for the number entered.
Default = 2.
Flash Hook
Timer
integer values,
in milliseconds
Length of flash hook that will be
generated and sent out when the
remote end initiates a flash hook
and it is regenerated locally.
Default = 600 ms.
Message
Waiting Light
Y/N Applicable only when MultiVOIP
is used with Avaya Magix PBX
units equipped with Merlin
Messaging Centralized mail.
When enabled, the Message
Waiting Light feature allows the
PBX to send mode-codes and
message-waiting indications to
another Avaya Magix PBX, which
in turn will turn on the message
waiting light on a phone station. It
also allows Direct Inward Dialing,
such that no additional dial tone is
needed on voip call.