Filter
Top Products
Quick Start Instructions MultiVOIP User Guide
52
Placement
Mount your MultiVOIP in a safe and convenient location where cables for
your network and phone system are accessible. Rack-mounting instructions
are in Chapter 3: Mechanical Installation & Cabling.
The Command/Control Computer (Specs & Settings)
The computer used for command and control of the MultiVOIP
(a) must be an IBM-compatible PC,
(b) must use a Microsoft operating system,
(c) must be connected to your local network (Ethernet) system, and
(d) must have an available serial COM port.
The configuration tasks and control tasks the PC will have to do with the
MultiVOIP are not especially demanding. Still, we recommend using a
reasonably new computer. The computer that you use to configure your
MultiVOIP need not be dedicated to the MultiVOIP after installation is
complete.
COM port on controller PC. You’ll need an available COM port on the
controller PC. You’ll need to know which COM port is available for use with
the MultiVOIP (COM1, COM2, etc.).