Multi-Tech Systems MVP-2400 IP Phone User Manual


 
MultiVOIP User Guide Software Installation
109
Introduction
Configuring software for your MultiVOIP entails three tasks:
(1) loading the software onto the PC (this is “Software Installation and is
discussed in this chapter),
(2) setting values for telephony and IP parameters that will fit your system (this
is “Technical Configuration” and it is discussed in Chapter 5 for T1/E1
MultiVOIP units and in Chapter 6 for analog MultiVOIP units), and
(3) establishing “phonebooks” that contain the various dialing patterns for
VOIP calls made to different locations (this is “Phonebook Configuration” and
it is discussed in Chapters 7, 8, and 9 for T1, E1, and analog MultiVOIP units
respectively).
Loading MultiVOIP Software onto the PC
The software loading procedure does not present every screen or option in the
loading process. It is assumed that someone with a thorough knowledge of
Windows and the software loading process is performing the installation.
The MultiVOIP software and User Guide are contained on the MultiVOIP
product CD. Because the CD is auto-detectable, it will start up automatically
when you insert it into your CD-ROM drive. When you have finished loading
your MultiVOIP software, you can view and print the User Guide by clicking
on the View Manuals icon.
1.Be sure that your MultiVOIP has been properly cabled and that the power is
turned on.