Filter
Top Products
Technical Configuration (Analog/BRI) MultiVOIP User Guide
226
FXS Loop Start Interface: Parameter Definitions
Field Name Values Description
Message
Waiting Light
Y/N Applicable only when MultiVOIP
is used with Avaya Magix PBX
units equipped with Merlin
Messaging Centralized mail.
When enabled, the Message
Waiting Light feature allows the
PBX to send mode-codes and
message-waiting indications to
another Avaya Magix PBX, which
in turn will turn on the message
waiting light on a phone station. It
also allows Direct Inward Dialing,
such that no additional dial tone is
needed on voip call.
Ring Count,
FXS
integer values
Maximum number of rings that the
MultiVOIP will issue before giving
up the attempted call.
FXS Options,
Current Loss
Y/N
When enabled, the MultiVOIP will
interrupt loop current in the FXS
circuit to initiate a disconnection.
This tells the device connected to
the FXS port to hang up. The
Multi-VOIP cannot drop the call;
the FXS device must go on hook.