Filter
Top Products
Quick Start Instructions MultiVOIP User Guide
62
Phone/IP Starter Configuration (continued)
11. Enable premium (H.450) telephony features. (Not supported in BRI 502c
software.)
Go to Supplementary Services. Select any features to be used.
For Call Hold, Call Transfer, & Call Waiting, specify the key sequence that
the phone user will press to invoke the feature. For Call Name
Identification, specify the allowed name types to be used and a caller-id
descriptor.
If Call Forwarding is to be used, enable this feature in the
Add/Edit Inbound Phone Book screen.
After making changes, click on OK in the current configuration screen
before moving on to the next configuration screen.
12. (For analog gatekeeper-equipped models only. These have
model numbers with a “G” suffix.
For MVP2410G, skip to step 13 and see User Guide
for embedded gatekeeper info.
For units without embedded gatekeeper, skip to step 13.)
For quick-start purposes, we will arrange for the gatekeeper-equipped voip
unit to register itself as a client of its own gatekeeper capability. Then we will
set up a gatekeeper-controlled call from one channel to another of that self-
same gatekeeper-equipped voip unit to demonstrate that the gatekeeper
functionality is active. Thereafter, you can register additional voip units (and
other endpoints) with the gatekeeper-equipped voip per instructions in the
User Guide.