Filter
Top Products
MultiVOIP User Guide Quick Start Instructions
51
Phone/IP Details Often Needed/Wanted
Obtain Email Address for VOIP (for email call log reporting)
required if log reports of
VOIP call traffic
are to be sent by email
Optional
SMTP Parameters
Preparation Task:
Ask Mail Server
administrator to set up
email account (with
password) for the
MultiVOIP unit itself. Be
sure to give a unique
identifier to each
individual MultiVOIP unit.
Get the IP address of the
mail server computer, as
well.
To: I.T. Departm ent
re: em ail account for VOIP
voip-unit2@biggytech.com
Identify Remote VOIP Site to Call
When you’re done installing the MultiVOIP, you’ll want to confirm that it is
configured and operating properly. To do so, it’s good to have another voip
that you can call for testing purposes. You’ll want to confirm end-to-end
connectivity. You’ll need IP and telephone information about that remote site.
If this is the very first voip in the system, you’ll want to coordinate the
installation of this MultiVOIP with an installation of another unit at a remote
site.
Identify VOIP Protocol to be Used
Will you use H.323, SIP, or SPP? Each has advantages and disadvantages.
Although it is possible to mix protocols in a single VOIP system, it is highly
desirable to use the same VOIP protocol for all VOIP units in the system. SPP
is a non-standard protocol developed by Multi-Tech. SPP is not compatible
with the “Proprietary” protocol used in Multi-Tech’s earlier generation of voip
gateways.