Multi-Tech Systems MVP-2400 IP Phone User Manual


 
Technical Configuration (Digital Voips) MultiVOIP User Guide
164
The Regional Parameters fields are described in the table below.
“Regional Parameter” Definitions
Field Name Values Description
Country/
Region
USA, Japan, UK,
Custom
Name of a country or region that uses a
certain set of tone pairs for dial tone,
ring tone, busy tone, ‘unobtainable’
tone (fast busy tone) and re-order tone
(a tone pattern indicating the need for
the user to hang up the phone). In
some cases, the tone-pair scheme
denoted by a country name may also
be used outside of that country. The
“Custom” option (button) assures that
any tone-pairing scheme worldwide
can be accommodated.
Type column
dial tone,
ring tone,
busy tone,
unobtainable tone
(fast busy),
& re-order tone
Type of telephony tone-pair for which
frequency, gain, and cadence are being
presented.
Frequency 1 frequency in Hertz Lower frequency of pair.
Frequency 2 frequency in Hertz
Higher frequency of pair.
Gain 1 gain in dB
+3dB to –31dB
and “mute” setting
Amplification factor of lower
frequency of pair.
This figure describes amplification that
the MultiVOIP
applies to outbound tones entering the
MultiVOIP at
the T1 port. Default: -16dB
Gain 2 gain in dB
+3dB to –31dB
and “mute” setting
Amplification factor of higher
frequency of pair.
This figure describes amplification that
the MultiVOIP
applies to outbound tones entering the
MultiVOIP at
the T1 port. Default: -16dB