Filter
Top Products
Operation & Maintenance MultiVOIP User Guide
408
MultiVOIP Program Menu (cont’d)
Menu Selection Description
Download Factory Defaults Select this to return the configuration
parameters to the original factory values.
Download Firmware Select this to download new versions of
firmware as enhancements become
available.
Download User Defaults To be used after a full set of parameter
values, values specified by the user, have
been saved (using Save Setup). This
command loads the saved user defaults
into the MultiVOIP.
Set Password Select this to create a password for access
to the MultiVOIP software programs
(Program group commands, Windows
GUI, web browser GUI, & FTP server).
Only the FTP Server function requires a
password for access. The FTP Server
function also requires that a username be
established along with the password.
Uninstall Select this to uninstall the MultiVOIP
software (most, but not all components are
removed from computer when this
command is invoked).
Upgrade Software Loads firmware (including H.323 stack)
and factory default settings from the
controller PC to the MultiVOIP unit.
“Downloading” here refers to transferring program files from the PC to the
nonvolatile “flash” memory of the MultiVOIP. Such transfers are made via the
PC’s serial port. This can be understood as a “download” from the perspective
of the MultiVOIP unit.
When new versions of the MultiVoip software become available, they will be
posted on MultiTech’s web or FTP sites. Although transferring updated
program files from the MultiTech web/FTP site to the user’s PC can generally
be considered a download (from the perspective of the PC), this type of
download cannot be initiated from the MultiVoip software’s Program menu
command set.
Generally, updated firmware must be downloaded from the MultiTech
web/FTP site to the PC before it can be loaded from the PC to the MultiVOIP.