Multi-Tech Systems MVP-2400 IP Phone User Manual


 
Embedded Gatekeeper MultiVOIP User Guide
456
The required MVP410G phonebook configuration is shown below.
“Compton” MVP410G Gateway Functions and Settings
Function PhBk Config
Scn Settings
1
Inbound PhoneBook
Screen Settings
Phone User’s
Actions
Put MVP410G
gateway under
gatekeeper
control
Gatekeeper IP
Address =
192.168.80.12
-- --
Give remote
users access to
Compton
factory PBX
extensions
Gateway
Prefix = 5
Remove Prefix = 5;
Add Prefix = 5
Dial 4 digits
beginning with
“5”
Give remote
users access to
Compton area
PSTN
Gateway
H.323 ID
= 59
Remove Prefix = 59;
Add Prefix= 9
Dial “59” plus
Compton local
number
Outbound PhoneBook
Screen Settings
Get access to
Mucksville
office PBX
extensions
--
Destination Pattern = 7
RemovePrefix = 7
Select “Use GateKeeper”
Gateway H.323ID = none
Gateway Prefix = 7
Dial 4 digits
beginning with
“7”
Get access to
Mucksville area
PSTN
-- Destination Pattern = 79
RemovePrefix = none
Select “Use GateKeeper”
Gateway H.323ID = 79
Gateway Prefix = none
Dial “79” plus
Mucksville
local number
Get access to
Rootersville
office phone
-- Destination Pattern = 6000
RemovePrefix = none
Select “Use GateKeeper”
Gateway H.323ID = 6000
Gateway Prefix = none
Dial 6000.
Get access to
Rootersville
area PSTN
--
1. “PhoneBook Configuration
screen settings”
Destination Pattern = 6
RemovePrefix = none
Select “Use GateKeeper”
Gateway H.323ID = 6
Gateway Prefix = none
Dial “6”;
get second dial
tone. Dial
Hoot #.