Filter
Top Products
Chapter 4 — Troubleshooting and Maintaining the CN2G
74 CN2G Handheld Computer User’s Manual
To warm boot the CN2G using the Power key
1 Press and hold the Power key for approximately 10 seconds.
Note: After about 5 seconds, the backlight toggles. Keep
holding the Power key for another 5 seconds until the
backlight flashes.
2 Release the Power key. The screen remains blank for a few
seconds, the Refreshing the File System dialog box appears,
and the CN2G warm boots.
Cold Booting the CN2G
If the CN2G or application is locked up and does not respond
to a warm boot, follow this procedure to perform a cold boot.
When you perform a cold boot, all data in your RAM storage is
deleted.
To cold boot the CN2G
1 Open the battery door and remove the battery.
2 Using the end of the stylus, press the Reset button on the
inside of the battery compartment.
Reset
button
Do not use force or a sharp object when pressing the
Reset button. You may damage the Reset button.
3 Install the battery and battery door.
After approximately 4 seconds, the CN2G starts the power on
sequence.