Filter
Top Products
Chapter 2 — Configuring the CN2G
CN2G Handheld Computer User’s Manual 43
Configuring 802.1x Security With Microsoft Security
1 Make sure you have configured the communications and
radio parameters on your CN2G.
2 If you plan to use TLS for authentication, load a user and
root certificate on your CN2G. For help, see “Loading
Certificates” on page 47.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Security
Settings > Microsoft Security.
5 For Infrastructure Mode, choose Infrastructure.
6 For Network Authentication, choose Open.
7 For Data Encryption, choose WEP.
8 For 802.1X Authentication, choose TLS or PEAP, and tap
Save.
If you choose TLS:
a Select Properties and tap the Run App button. The
Authentication Settings box appears.
b From the Authentication Settings box, tap the Select
button.
c Select your certificate from the list and tap Save.
If you choose PEAP:
a Select Properties and tap the Run App button. The
Authentication Settings box appears.
b Select the Validate Server check box.