Filter
Top Products
Chapter 2 — Configuring the CN2G
42 CN2G Handheld Computer User’s Manual
Configuring 802.1x Security With Funk Security
1 Make sure you have configured the communications and
radio parameters on your CN2G.
2 Make sure you have selected Funk as your security choice.
3 If you plan to use TLS for authentication, load a user and
root certificate on your CN2G. For help, see “Loading
Certificates” on page 47.
4 Open Intermec Settings.
5 Choose Communications > 802.11 Radio > Security
Settings > Funk Security > Profile.
6 For Association, tap Open and tap Save.
7 For Encryption, tap WEP and tap Save.
8 For Authentication, tap TTLS, PEAP, or TLS and tap Save.
If you choose TTLS or PEAP:
a Select User name, type your user name, and then tap
Save.
b Select Password prompt, choose Enter password now,
and then tap Save.
Note: You can use Prompt for password to troubleshoot
your connection to the network if you have problems.
c Select User Password, type a user password, and then tap
Save.
d For Validate Server Certificate, choose Enabled and tap
Save.
If you choose TLS:
a For Validate Server Certificate, choose Enabled and tap
Save.
b You can also enter a User Name, Subject Name and
Server Common Name if you want to increase your level
of security.
9 Exit Intermec Settings.