Filter
Top Products
Chapter 2 — Configuring the CN2G
40 CN2G Handheld Computer User’s Manual
If you choose PEAP:
a Tap Properties and tap the Run App button. The
Authentication Settings box appears.
b Tap the Validate Server check box.
c Tap Enter. After the radio starts to authenticate, the
Network Password dialog box appears:
d Enter a User Name and Password and tap the Save
Password check box.
e (Optional) In the Domain field, enter the Active Directory
domain associated with the user account.
f Press Enter.
8 Exit Intermec Settings.
To enable WPA-PSK security on your CN2G With Microsoft security
1 Make sure you have configured the communications and
radio parameters on your CN2G.
2 If you plan to use TLS for authentication, load a user and
root certificate on your CN2G. For help, see “Loading
Certificates” on page 47.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Security
Settings > Microsoft Security.
5 For Infrastructure Mode, choose Infrastructure.