Filter
Top Products
Chapter 1 — Using the CN2G Handheld Computer
6 CN2G Handheld Computer User’s Manual
Removing the Battery
Follow these instructions to remove the battery from the CN2G.
Only use the stylus to remove the battery. If you use any
other tool or method to remove the battery, you may
damage the battery or the CN2G.
Removing the main battery when the backup battery low or
critically low icon appears on the status bar may cause your
CN2G to cold boot and you may lose data.
If you fail to replace the battery immediately, you may lose
important data or applications.
To remove the battery
1 Push down on the battery door latch, and pull up on the
battery door.
2 Remove the battery door and set it aside.
Battery
door
latch
3
Insert the stylus between the battery and the CN2G case, and
press straight down until the battery is released.