Filter
Top Products
Chapter 3 — Developing and Installing Applications
62 CN2G Handheld Computer User’s Manual
Intermec Settings begins the upgrade process. When the next
message box appears on the PC screen, you can remove the
CN2G and place it in a powered dock.
The CN2G updates the system and then cold boots.
5 If you need to upgrade more CN2Gs, place another CN2G
in the communications dock and the remote device upgrade
starts automatically.
6 When you are done upgrading CN2Gs, choose File > Exit
from the Main Menu.
Upgrading the Persistent Storage Manager Files
To upgrade the Persistent Storage Manager (PSM) files for your
CN2G, you need:
• the device upgrade ZIP file containing the PSM files. This file
is available from the Intermec web site at www.intermec.com.
Go to Service & Support > Downloads.
• an SD card reader.
To upgrade the PSM files
1 Copy the device upgrade ZIP file to your PC, and unzip the
PSM files. You should see these folders:
• 2577
• DOCImage
2 Remove the SD card from the CN2G and place it in the SD
card reader. For help, see “Using the SD Card” on page 17.
3 Copy the 2577 and DOCImage folders to the SD card.
4 Install the SD card in your CN2G.