Intermec CN2G PDAs & Smartphones User Manual


 
Chapter 1 — Using the CN2G Handheld Computer
CN2G Handheld Computer User’s Manual 3
The CN2G includes these features:
802.11b/g radio
.NET Compact Framework
Internet Explorer 6
CCX v1.0 compliance
IPv6 support
Color display with touch screen
1D linear imager
64MB flash/128MB RAM memory
400 MHz processor
For a complete list of accessories, see “Accessories for the
CN2G” on page 79.
What’s New?
This revision of the user’s manual includes this new information:
Information about the IEEE 802.11b/g wireless radio
Instructions for removing the main battery without damaging
the battery or CN2G
Instructions for inserting an SD card
Using the Battery
The CN2G uses a lithium-ion battery as its main power source.
You must fully charge the main battery before you can use the
CN2G. When you change the battery, the backup battery
maintains the computer’s status, memory, and real-time clock
for at least 5 minutes.
The lithium-ion battery pack that is used in this device
may present a fire or chemical burn hazard if it is mistreated.
Do not disassemble it, heat it above 100°C (212°F), or
incinerate it.