Filter
Top Products
Chapter 2 — Configuring the CN2G
CN2G Handheld Computer User’s Manual 39
Configuring WPA Security With Microsoft Security
Use these procedures to set WPA-802.1x and WPA-PSK
security on your CN2G with Microsoft security. These
procedures assume that Microsoft is selected as your security
choice.
To enable WPA-802.1x security on your CN2G with Microsoft security
1 Make sure you have configured the communications and
radio parameters on your CN2G.
2 If you plan to use TLS for authentication, load a user and
root certificate on your CN2G. For help, see “Loading
Certificates” on page 47.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Security
Settings > Microsoft Security.
5 For Infrastructure Mode, choose Infrastructure.
6 For Network Authentication, choose WPA and tap the Save
icon in the upper right corner of the window. Data
Encryption is set to TKIP by default.
7 For 802.1x Authentication, choose either TLS or PEAP.
If you choose TLS:
a Tap Properties and tap the Run App button. The
Authentication Settings box appears.
b From the Authentication Settings box, tap the Select
button.
c Tap your certificate from the list and tap Enter.