Filter
Top Products
30 - HP Palmtop PC User Guide
or
Tap Cut (or press + ) to remove the file from your palmtop PC to the
PC Card.
5. Open the Start menu, tap My Handheld PC, and open the PC Card folder.
6. Tap Paste in the Edit menu (or press + ). Removing a PC Card
It’s important to follow the steps below when removing a PC Card to prevent
possible data loss:
1. Close all applications on your palmtop PC that have open files on the card.
2. Shut down your HP Palmtop PC.
3. Press the button to the left of the card slot to eject the card.
Formatting a New PC Card
If you insert a new, unformatted card, you will be prompted to format it. (It is not
possible to reformat an already formatted card.)
USING A PC CARD MODEM
You can also use a PC Card modem in the PC Card slot. For detailed instructions
on how to make a dial-up connection between your palmtop PC and a remote
computer, refer to ‘Communicating Remotely’ of the Microsoft Handheld PC
Companion Guide.
For a list of PC Card modems that are supported on the HP Palmtop PC, refer to
the HP web site at: http://www.hp.com/handheld/index.html.
Note
• PC Card modems that draw more than 150mA on battery power are not
supported. Check with your PC Card modem manufacturer on
power requirements.
• It is recommended that you use an AC adapter when using PC Card modems
as they drain battery power.
• To avoid overheating, the palmtop PC should be placed on a hard surface
when you are using a PC Card modem and AC adapter simultaneously.
• Using PC Card modems when the batteries are low can cause data
corruption or loss.
CTRL V
CTRL
X
!