Filter
Top Products
24 - HP Palmtop PC User Guide
Setting a Password
To set a password, double-tap the Password icon in the Control Panel.
When your password is enabled, you will be prompted for it whenever you turn
on you HP Palmtop PC or try to change your password information. Passwords
are not case sensitive.
Important
Record your password and put it in a safe place. If you forget your password, you
will have to perform a full reset on your HP Palmtop PC. To do this, first turn the
palmtop PC off, then remove the main batteries, then the backup battery.
This destroys all data. You must then reinitialize and recalibrate the palmtop PC
and restore its data from a backup.
Any data saved or changed since your last backup is permanently lost.
Adding and Removing Software
You easily can add new software to your HP Palmtop PC using your partnership
with the desktop PC. To install new software:
1. Connect your palmtop PC to your desktop PC and start Windows CE Services
2.0 Mobile Devices.
2. Run the Installation Application File on your desktop PC.
3. Any files required on your desktop PC or palmtop PC are installed on the
appropriate device.
If you want to add fonts, move the font files from your desktop PC to
your palmtop PC by using Mobile Devices.
!
2. Confirm your
password by typing
it again.
3. Tap here to cause
your password to
take effect.
1. Enter a password of up to eight characters.