Filter
Top Products
67
IN USE/V-MAIL Indicator on the base flashes:
• Provided your phone company offers voice messaging service and you
subscribe to it, the IN USE/V-MAIL indicator on the base flashes when the
phone is not in use to indicate there is a message waiting. It stops flashing
after the message is reviewed.
cAllEr id solutions
No display:
• Charge the battery (for 6 hours), or replace the battery.
• Make sure the unit is connected to a non-switched electrical outlet.
Disconnect the AC power supply from the base and reconnect it.
Caller ID error message:
• The unit displays this message if it detects anything other than valid Caller
ID information during the silent period after the first ring. This message
indicates the presence of noise on the line.
No Caller ID:
• You must be subscribed to Caller ID service from your local telephone
company to receive Caller ID information.
bAttEry solutions
If you experience any of the following problems, even after recharging the
battery, you may need to replace the battery pack:
• Short talk time
• Poor sound quality
• Limited range
• Charge indicator fails to turn on
gEnErAl product cArE
To keep your unit working and looking good, follow these guidelines:
• Avoid dropping the handset, as well as other rough treatment to the phone.
• Clean the phone with a soft cloth.
• Never use strong cleaning agents, paint thinner, abrasive powder, alcohol, or
other chemical products to clean the unit. Doing so will damage the finish.
• Retain the original packaging in case you need to ship the phone at a later
date.
• Periodically clean the charge contacts on the handset and base with a clean
soft cloth.