Filter
Top Products
26
NOTE: The base doesn’t need to be in DE-REGISTER mode while the
handset is de-registered.
NOTE: You must place the handset on the base cradle during
de-registration.
NOTE: A handset may register to another base without de-registering via
the original base. But the original base, however, will keep the handset’s
registration information.
bAsE
To de-register all handsets or remove one handset, use the base. The handset
must be kept near the base during the de-registration process. After de-
registration, handsets will no longer link to the base any more.
1. Make sure the phone is OFF (Not in TALK mode).
2. Press the PROGRAM/OK button to enter the menu mode.
3. Press the 5 or 6 button until the arrow in the display points to
DE-REGISTER.
4. Press the PROGRAM/OK button to go to DE-REGISTER. The display
will show:
5. Press the 5 or 6 button to select an individual handset or all handsets. For
example, if you select ALL HANDSETS, the display shows:
6. Press the PROGRAM/OK button to confirm your selection. The
display shows: