Filter
Top Products
30
bAsE displAy
When the phone is OFF, the base display shows the Current Time on the upper
row of the screen, and Line Status/Prompt Message/Number of new CID or total
Caller ID records received on the next line. It is not necessary for you to set up
the clock time. The clock time is automatically updated when the unit receives
Caller ID information. For example; when there are 12 new Caller ID in the
database, the display shows:
OR
When there are 36 Caller ID records in the Caller ID database, and no new
records have been received in the database, the display shows:
NOTE: The handset uses the same display format for the Caller ID
information.
linKing tHE HAndsEt to tHE bAsE
When the handset is OFF (not in TALK mode), it automatically changes to the
battery saver mode. If the handset receives new information from the base, the
handset display is updated.
If the handset and base are out of range, or the base power is turned OFF, the
handset cannot link to the base. If you try to use the system resource, you will
hear a warning beep, and the display shows:
mAKing ExtErnAl cAlls
Manual Dialing:
1. Pick up the handset and press the TALK button on the handset. Wait for the
dial tone.
2. Dial the number you want to call.
3. When finished, press the TALK button again to hang up. The call duration
shows on the display.