Filter
Top Products
20
7. Press the PROGRAM/OK button to confirm and save your selection. The
display shows:
rEgionAl ArEA codEs
You may set up to six 3-digit regional area codes. Each code must only be three
digits long. Do not use the * or # characters. If you enter more or less than three
digits, you will hear a warning beep.
1. Make sure your phone is OFF (not in TALK mode).
2. Press the PROGRAM/OK button to enter the menu mode.
3. Press the 5 or 6 button until the arrow in the display points to AREA CODE.
Press the PROGRAM/OK button to enter the AREA CODE menu.
4. Press the 5 or 6 button until the arrow in the display points to REGIONAL
CODE 1.
5. Press the PROGRAM/OK button to go to REGIONAL CODE 1. The default
setting is EMPTY.
6. Enter your first 3-digit regional area code.
7. Press PROGRAM/OK button to confirm and save your selection.
8. Repeat steps 4 to 7 for REGIONAL CODE 2 to 6.
NOTE: To delete a previously entered Local Area or Regional Code press
the DELETE button.
Editing tHE voicE mAil numbEr
1. Make sure your phone is OFF (not in TALK mode).
2. Press the PROGRAM/OK button to enter the menu mode.
3. Press the 5 or 6 button until the arrow in the display points to VOICE MAIL.
4. Press the PROGRAM/OK button to go to VOICE MAIL number editing. The
default setting is EMPTY.
5. Use the touch tone pad on the handset to enter the voice mail number (up to
20 digits, for example, 3155551324).
NOTE: If you enter over 14 digits, the display shows the last 14 digits. If
you try to enter more than 20 digits, you will hear a warning beep.