Filter
Top Products
Page 96 of 174 Installation
553-3001-216 Standard 5.00 January 2002
2 Place the telephone and the Module face down on a padded, level
surface, and align them.
3 Plug the cable from the Module into the 10-pin connection port on the
telephone. See Figure 14.
Figure 14
KBA Installation
4 Thread the cable through the opening in the side of the telephone.
5 Insert the clips on the telephone into the hinges on the footstand; then
press on the front of the footstand until it snaps into place.
6 Install the Single KBA Footstand Assembly. See Figure 15.
Tilt Handles
ACM
connection
port
Clips
Plug cable into10-pin
connection port
553-9538