Filter
Top Products
Appendix A: Flash Download procedure Page 141 of 174
M3900 Series Meridian Digital Telephones Description, Installation and Administration
• When scheduling the Flash Download of sets, note that one hour before
the Midnight routines execute, the flash download process is gracefully
stopped. The Flash downloading resumes once midnight routines are
executed.
• When a schedule is defined in LD 97 and the Flash Download is started
(by entering the FDLS command in LD 32), all scheduled sets are queued
for download. The download process remains active in the background
until the download is complete or is canceled (using the FDLC command
in LD 32). If the download is active in the background (sets not actively
downloading per the scheduled download time) and the download
schedule is removed in LD 97, the download begins immediately for the
sets that remain in the download queue. Use the LD x SUSP command
to load an overlay when the download is active in the background
(scheduled but not actively downloading sets). It is also not possible to
perform a single set download (FDLU, FDLI, or FDLF command from
LD 32) while the download is active in the background. If an individual
download is attempted in this case, the system indicates that the PSDL is
not idle. If an individual set download is necessary while the download
is active in the background, you must cancel the download in LD 32
using the FDLC command. Once the individual downloads are complete,
you can restart the schedule download with the FLDS command in
LD 32.
Note: If the force option is used with the FDLS command, all sets in the
original schedule are downloaded.
• For M3900 sets actively being flash downloaded when the Flash
Download Cancel FDLC command is issued, the flash download to these
sets is completed before the flash download process cancels.
• M3905 sets acquired by the Symposium Call Center Server (SCCS) do
not have to be de-acquired (pulled out of all queues) before the flash
download is started. However, during the download, the agent using the
M3905 set is placed in a maintenance-busy state for approximately 12
minutes. As a result, the SCCS is not able to record any agent statistics
for agents using the M3905 sets during the download. The SCCS agent
reports for the interval in which the download occurred will, therefore,
be inaccurate.