Filter
Top Products
Page 130 of 174 Appendix A: Flash Download procedure
553-3001-216 Standard 5.00 January 2002
Overlay 32
To use the Flash Download capability, load Overlay 32 and issue the
following commands:
FSTN lscu
cu
Starting terminal number for Flash Download.
Prompt appears only if FTNR = YES.
FETN lscu
cu
Ending terminal number for Flash Download.
Prompt appears only if FTNR = YES.
FDNR
(NO)
YES
DN range restriction option for Flash Download.
No DN restriction (default).
Specify DN range.
FDDN cd1d2
<CR>
Flash Download Prime Directory Number range.
Prompt appears only if FDNR = YES.
c = Customer number (0-99)
d1 = starting Prime DN
d2 = ending Prime DN
FRCE
(NO)
YES
System-wide Flash Download control option
Conditional (default). System-wide Flash Download
(through FDLS in LD 32) applies only to an M3900 series
set whose flash firmware version is different from the
version currently found on the system disk.
Forced System-wide Flash Download to all specified M3900
series sets regardless of their current flash firmware
versions.
Note 1: Use this option with caution! Once the download tree is
built (i.e., after executing FDLS in LD 32), this option automatically
reverts to NO.
Note 2: This option is not applicable to reporting.
FVER
v
Flash firmware version specified for full report.
v = Flash firmware version (0-99)
If 0, report all versions (default).
Note: This option is applicable to reporting only (through FSUM
ALLinLD32).