Configure the M3900 Series Meridian Digital Telephone Page 69 of 174
M3900 Series Meridian Digital Telephones Description, Installation and Administration
Print data for Virtual and Host Terminals
Print M3900 firmware versions found on the system disk
The firmware versions for each M3900 Series set type will printed along with
the versions of any other downloadable peripheral software.
LD 20 – Print Terminal Number Block (TNB) data for Virtual and Host Terminals
Prompt Response Description
REQ: PRT
LTN
Print data block for the requested terminal type(s).
List Terminal Numbers of the requested terminal type(s).
TYPE: xxxxx
3903V
3904V
3903H
3904H
TNB
Enter appropriate telephone model where xxxxx:
3903V = M3903 Virtual Terminal.
3904V = M3904 Virtual Terminal.
3903H = M3903 Host Terminal.
3904H = M3904 Host Terminal.
Note 1: The only telephone types of the M3900 Series that can be
configured as a Virtual or Host Terminal are the M3903 and M3904.
Note 2: The Print TNB and List TNB requests always show the
logged-off TNB data. In logged-in state, an indication of the
logged-in TN (“HOST TN” or “VIRTUAL TN”) is added.
... ... ...
LD 22 – Print request for peripheral software versions
Prompt Response Description
REQ: PRT Print
TYPE: PSWV Peripheral software versions on disk.