Filter
Top Products
Page 70 of 174 Configure the M3900 Series Meridian Digital Telephone
553-3001-216 Standard 5.00 January 2002
Configure parameters for System-wide Flash Download
LD 97 – Configure parameters for System-wide Flash Download (Part 1 of 2)
Prompt Response Description
REQ CHG
PRT
Change Flash Download Parameters.
Print Flash Download Parameters.
TYPE FDL Flash Download for M3900 Sets
FDTP t
<CR>
Enter M3900 set type selected for Flash Download
3902 = M3902.
3903 = M3903.
3904 = M3904.
3905 = M3905.
ALL = All of the above.
NONE = None of the above (default).
No further prompt; returns to “REQ”.
FDTM (NO)
YES
<CR>
Time interval restriction for Flash Download
NO = Do not change time intervals (default).
YES = Proceed to change time intervals
Note 1: Flash Download is automatically paused one hour before virtual
midnight (see TODR in LD 17) to allow midnight routines to run.
Note 2: This option is not applicable to reporting.
FDAY dn
<CR>
Enter day and number of time intervals for Flash Download.
Prompt appears only if FDTM = YES
Day is re-prompted until carriage return <CR> alone is entered.
d = day of the week (0-6 for Sunday to Saturday)
n = number of time intervals (0-4); to disallow download for the day,
enter 0.
Note: If two or more intervals are specified, they must be non-overlapping,
non-consecutive, and in increasing order.
FINT sl
<CR>
Enter starting hour and length for a time interval.
Prompted n times if n>0.
s = starting hour (0-23)
l = length of interval in hours (1-24)