Filter
Top Products
Configure the M3900 Series Meridian Digital Telephone Page 57 of 174
M3900 Series Meridian Digital Telephones Description, Installation and Administration
Configure the M3901, M3902, M3903, M3904,
and M3905 telephone
LD 11 – Configure the M3900 Series Digital Telephone (Part 1 of 4)
Prompt Response Description
REQ: NEW
CHG
New data.
Change current data.
TYPE: x..x Type of telephone.
3901 = M3901.
3902 = M3902.
3903 = M3903.
3904 = M3904.
3905 = M3905.
3903H = M3903 Host Terminal.
3904H = M3904 Host Terminal.
3903V = M3903 Virtual Terminal.
3904V = M3904 Virtual Terminal.
Note 2: The M3903, M3904, and 3905 telephones only support the Host
Terminal and the Virtual Terminal feature.
Note 3: If the M3901, M3902 or M3905 are configured as a Virtual Terminal,
the error message SCH0099 is output.
Note 4: M3903, M3904, and M3905 are the telephone types supported for
Corporate Directory and Set-to-Set Messaging.
TN
lscu
cu
Terminal number.
l = loop address. If confirmed as 3903V or 3904V, the loop must be a
phantom. If confirmed as 3903H or 3904H, the loop must NOT be a
phantom
s = shelf address.
c = card address.
u = unit address.
For Option 11C, input only the card and unit address. If confirmed as
3903V or 3904V the card must be a phantom (card slots 61-80).
Note: If the telephone has an Analog Terminal Adapter (ATA), then use the
voice Terminal Numbers 16-31.
... ... ...