Filter
Top Products
XTP SR HDMI Scaling Receiver • XTP System Configuration Software 39
Audio tab
Click the Audio tab (see figure 31,
1
) to open the Audio screen. This screen contains
audio output settings.
Figure 31. Audio Tab
Output panel
The Output panel on the Audio screen is used to mute or unmute all audio output and
control volume on the analog audio output.
2
Mute All — Click the Mute All button to mute or unmute all audio output. When
muted, the button turns red.
3
Volume slider — Click and drag the handle of the Volume slider, enter a value in the
Volume field, or click the Up and Down arrows to adjust analog audio output volume.
4
Analog audio for DVI displays — Select the check box below the Volume slider to
send analog audio to a display receiving DVI signals.
NOTE: When this check box is selected, Extron EDID Minder does not show the
EDID information of the connected display. It shows a 720p Extron EDID.